Rear Seat Belt

Replacement

Rear Seat Belt Replacement

CAUTION:
- When installing the belt, make sure not to damage the retractor.

1. Remove the rear seat assembly.

2. Remove the front door scuff trim.

3. Remove the cap (B).
4. After loosening the mounting bolt, then remove the rear pillar trim (A).




5. Remove the mounting clips and then center pillar lower trim (A).




6. After loosening the mounting screws and bolts, then remove the luggage partition tray trim (A).




7. After loosening the mounting bolt, then remove the rear seat belt lower anchor (A).

Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.8 - 39.8 lb-ft)




8. Remove the rear seat belt upper anchor cover (A).




9. Remove the package tray trim (A).




10. After loosening the mounting bolt, then remove the rear seat belt (A) and rear seat belt retractor (B).

Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.8 - 39.8 lb-ft)




11. Installation is the reverse of removal.

NOTE:
- Make sure the connector is plugged in properly.
- Replace any damaged clips.

Rear Seat Belt Buckle Replacement
1. Remove the rear seat cushion assembly.

2. After loosening the mounting bolt, then remove the rear seat belt buckle (A).

Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)




3. Installation is the reverse of removal.