Front Lower Arm

Replacement

Tension arm
1. Remove the front wheel & tire.

Tightening torque :
88.3 - 107.9 N.m(9.0 - 11.0 kgf.m, 65.1 - 79.6 lb-ft)

2. Remove the split pin and the castle nut (A).

Tightening torque :
78.5 - 88.3 N.m(8.0 - 9.0 kgf.m, 57.9 - 65.1 lb-ft)




3. Separate the tension arm from the front axle ball joint by using SST (09568-2J000).




4. Remove the flexible hose (A).

Tightening torque :
6.9 - 10.8 N.m(0.7 - 1.1 kgf.m, 5.1 - 8.0 lb-ft)




5. Loosen the bolts and nuts and then remove the tension arm (A) from the sub frame.

Tightening torque :
137.3 - 156.9 N.m(14.0 - 16.0 kgf.m, 101.3 - 115.7 lb-ft)




6. Installation is the reverse of removal.

Lateral arm
1. Remove the front wheel & tire.

Tightening torque :
88.3 - 107.9 N.m(9.0 - 11.0 kgf.m, 65.1 - 79.6 lb-ft)

2. Remove the split pin and the castle nut (A).

Tightening torque :
78.5 - 88.3 N.m(9.0 - 11.0 kgf.m, 57.9 - 65.1 lb-ft)




3. Separate the lateral arm from the front axle ball joint by using SST (09568-34000).




4. Loosen the bolts and nuts and then remove the lateral arm (A) from the sub frame.

Tightening torque :
137.3 - 156.9 N.m(16.0 - 18.0 kgf.m, 101.3 - 115.7 lb-ft)




5. Installation is the reverse of removal.