Repair Procedures

Removal

1. Disconnect (-) terminal from the battery.
2. Remove the console assembly.

3. Disconnect the sport mode connector (A) and indicator connector (B).




4. Take off the clip (A) and remove the shift cable assembly (C) by pressing the guide (B).




5. Remove the shift lever assembly (A) by removing the bolts.

Tightening torque :
9 - 14 N.m (0.9 - 1.4 kgf.m, 6.51 - 10.12 lb-ft)





Installation

1. Installation is the reverse order of removal.

CAUTION:
- When installing, set room side Shift lever and T/M side manual control lever to N position.
- After installing, check to be sure that this part operates as designed at each range of T/M side corresponding to each position of room lever.