Flywheel

MT : Install the flywheel.

Tightening torque : 117.7 - 127.5 N.m (12.0 - 13.0 kgf.m, 86.8 - 93.9 lb-ft)

NOTE:
- Always use new drive plate (or flywheel) bolts.
- Apply sealant to the screw part (10 mm from the end of the bolt) when reusing the drive plate bolts.
- Sealant: Three bond 2403, Loctite 200 or 204
- Install and uniformly tighten the 7 bolts, in several passes.