Turn Signals: Service and Repair

Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the rear combination lamp cover (A).




3. If necessary to remove the bulb, remove the bulb after removing rear combination cover.

[Turn Signal Lamp]




4. Remove the rear combination lamp after loosening the mounting nuts (4EA) and disconnecting the connector (A).








5. Remove the trunk lid trim.

6. Replace the bulb after removing the trunk lid lamp assembly.

[Back Up Lamp]




7. Remove the trunk lid lamp assembly (A) after loosening the mounting nuts (3EA) and disconnecting the connector.






Installation

1. Install the trunk lid lamp assembly.
2. Install the rear combination lamp.