Fuel Pump: Service and Repair

Removal

1. Release the residual pressure in fuel line .
2. Remove the fuel tank.

3. Disconnect the fuel tank pressure sensor & fuel pump connector (A).
4. Remove the plate cover (B) after removing the installation bolt, and then remove the fuel pump from the fuel tank.










Installation

1. Install in the reverse order of removal.

Fuel pump plate cover installation bolt:
2.0 - 2.9 N.m (0.2 - 0.3 kgf.m, 1.4 - 2.2 lb-ft)

CAUTION:
Be careful of fuel pump direction when installing .