C1707
C1704, C1705, C1706, C1707 LOW TIRE PRESSUREDescription
When the tire pressure monitoring system detects low inflation pressure, the low tire pressure warning lamps in the combination meter comes on.
DTC Logic
C1704-C1707:
DTC CONFIRMATION PROCEDURE
1. DTC REPRODUCTION PROCEDURE
With CONSULT-III
1. Drive at a speed of 40 km/h (25 MPH) or more for 10 minutes.
2. Perform BCM self-diagnosis.
Is DTC "C1704", "C1705", "C1706", "C1707" detected?
YES >> Proceed to diagnosis procedure. Refer to "Diagnosis Procedure".
NO >> INSPECTION END
Diagnosis Procedure
1. CHECK TIRE AIR PRESSURE
1. Check all tire air pressures.
2. Adjust all tire air pressures. Refer to WT-104, "Tire Air Pressure". [1][2]Specifications
Does all tire pressure data meet the specification?
YES >> GO TO 2.
NO >> Inspect or replace malfunctioning parts.
2. CHECK AIR PRESSURE SIGNAL
1. Drive at a speed of 40 km/h (25 MPH) or more for 10 minutes.
2. Check all tire pressure with CONSULT-III "DATA MONITOR" within 5 minutes.
Is inspection result normal?
YES >> INSPECTION END
NO >> Repair or replace damaged parts (tire or wheel). Refer to WT-95, "Service Notice or Precautions". Technician Safety Information
Special Repair Requirement
1. CHECK TIRE AIR PRESSURE
Check all tire air pressures. Refer to WT-104, "Tire Air Pressure". [1][2]Specifications
Does all tire pressure data meet the specification?
YES >> GO TO 2.
NO >> Inspect or repair the tires or wheels and adjust the tire pressure to the specification.
2. PERFORM ID REGISTRATION
Perform ID registration. Refer to WT-6, "ID REGISTRATION PROCEDURE: Special Repair Requirement". Transmitter ID Registration Procedure
>> END