Front Camera

FRONT CAMERA

Exploded View

AV-925 Exploded View:

DISASSEMBLY

Removal and Installation

REMOVAL
1. Remove harness clip and connector clip from front camera bracket.
2. Remove front emblem.
3. Remove front emblem mounting screws.
4. Remove front camera.

INSTALLATION
1. Installation is the reverse order of removal.
2. Perform camera image calibration. Refer to AV-438, "CALIBRATING CAMERA IMAGE (AROUND VIEW MONITOR): Special Repair Requirement". Calibrating Camera Image (Around View Monitor)

CAUTION: Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.) and replacing the around view monitor control unit.