Trunk / Liftgate Weatherstrip: Service and Repair

BACK DOOR WEATHER-STRIP

BACK DOOR WEATHER-STRIP : Exploded View

DLK-239 Exploded View:

BACK DOOR WEATHER-STRIP : Removal and Installation

REMOVAL
Pull up and remove engagement with body from weather-strip joint.

CAUTION: Never pull strongly on weather-strip.

INSTALLATION
1. Working from the upper section, align weather-strip mark with vehicle center position mark and install weather-strip onto the vehicle.
2. For the lower section, align weather-strip seam with center of back door striker.
3. Pull weather-strip gently to ensure that there is no loose section.

NOTE: Make sure that weather-strip is fit tightly at each corner and luggage rear plate.

4. Install mounting bolts of power back door drive assembly (Back door side).