Front Fender Liner: Service and Repair
FENDER PROTECTORFENDER PROTECTOR : Exploded View
EXT-25 Exploded View:
FENDER PROTECTOR : Removal and Installation
REMOVAL
1. Remove front fillet molding.
2. Remove front fender (rear) fixing grommets (A) with remover tool (B).
3. Remove center mudguard (1) fixing screws (A).
4. Remove center mudguard fixing bolt (B).
5. Remove clips of fender protector (rear).
6. Remove fender clip from wheel house arches, and then remove fender protector (rear) from wheel house.
7. Remove front fender (front) fixing grommet (A) with remover tool (B).
8. Remove fender protector (front) fixing bolts (A).
9. Remove fender protector (front) mounting clips.
10. Remove fender clip from wheel house arches, and then remove fender protector (front) from wheel house.
11. Remove the following parts after removing front fender protector.
- Air guide
- Fender clip
INSTALLATION
Install in the reverse order of removal.
REAR WHEEL HOUSE PROTECTOR
REAR WHEEL HOUSE PROTECTOR : Exploded View
EXT-27 Exploded View:
REAR WHEEL HOUSE PROTECTOR : Removal and Installation
REMOVAL
1. Remove bolt (A) of rear wheel house protector rear end.
2. Remove screws (A) of rear wheel house protector located on center mud guard.
3. Remove rear wheel house protector fixing clips and nuts and then remove rear wheel house protector.
INSTALLATION
Install in the reverse order of removal.