Blower Unit

BLOWER UNIT

Exploded View

VTL-31 Exploded View:

Removal and Installation

REMOVAL
1. Remove instrument lower panel RH.
2. Disconnect AWD control unit connector (AWD).




3. Disconnect ECM (1) connectors.
4. Remove mounting nuts (A), and then remove ECM with bracket attached.
5. Remove power steering control unit.
6. Disconnect intake door motor connector and blower motor connector.




7. Remove mounting bolt (A) and screw (B), from blower unit (1).
8. Remove blower unit.

CAUTION: Move blower unit rightward, and remove locating pin (1 part) and joint. Then remove blower unit downward.

INSTALLATION
Installation is basically the reverse order of removal.






CAUTION: Make sure locating pin (A) and joint (B) are securely inserted.