Receiver Dryer: Service and Repair

LIQUID TANK

Exploded View

HA-57 Exploded View:

Removal and Installation

REMOVAL
1. Use a refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant.
2. Remove hood lock cover.
3. Clean liquid tank and its surrounding area. Then remove dust and rust from liquid tank.

CAUTION: Be sure to clean carefully.




4. Remove mounting bolts (A) from liquid tank (1).
5. Remove liquid tank.

CAUTION: Cap or wrap the joint of the A/C piping and liquid tank with suitable material such as vinyl tape to avoid the entry of air.

INSTALLATION
Install liquid tank, and then install liquid tank bracket on condenser.

CAUTION:
- Check that liquid tank bracket is securely installed at protrusion of condenser. (Check that liquid tank bracket does not move to a position below center of liquid tank.)
- Replace O-rings of the A/C piping with new ones. Then apply compressor oil to them when installing.
- Check for leakages when recharging refrigerant.