Rear Turn Signal Lamp

REAR TURN SIGNAL LAMP

Exploded View

EXL-361 Explode View:

Removal and Installation

CAUTION: Disconnect the battery negative terminal or remove the fuse.

REMOVAL
1. Remove the rear bumper fascia.
2. Remove the rear turn signal lamp.

INSTALLATION
Install in the reverse order of removal.

Replacement

CAUTION:
- Disconnect the battery negative terminal or remove the fuse.
- Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after being turned off.

- Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.