Side Air Bag (Satellite) Sensor

SIDE AIR BAG (SATELLITE) SENSOR

Exploded View

SR-14 Exploded View:

Removal and Installation

WARNING:
- Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least 3 minutes.
- Do not use air tools or electric tools for servicing.

REMOVAL
1. Remove the front seat belt.
2. Remove the side air bag (satellite) sensor fixing nuts.
3. Disconnect harness connector and then remove side air bag (satellite) sensor.

CAUTION:

- Replace the satellite sensor if it has been dropped or sustained an impact.
- Replace the satellite sensor of deployed SRS front side air bag module and deployed SRS side curtain air bag module.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- Do not use old fixing nuts after removal; replace with new nuts.
- In the case that a malfunction is detected by the air bag warning lamp, after reparation or replacement of the malfunctioning parts, reset the memory by self-diagnosis or by the CONSULT-III.
- After the work is completed, check that no system malfunction is detected by air bag warning lamp. Refer to SRC-14, "Diagnosis Description". Initial Inspection and Diagnostic Overview