Power Adjustable Steering Column Switch: Service and Repair

TILT&TELESCOPIC SWITCH

Removal and Installation

REMOVAL

CAUTION: When removing and installing, use shop cloths to protect parts from damage.




1. Remove the steering column mask (1).
2. Press pawls and remove tilt & telescopic switch (2) from the steering column mask (1).

INSTALLATION
Install in the reverse order of removal.

CAUTION: Be sure to clump the harness to the right place.

NOTE: After installing the driver seat, perform additional service when removing battery negative terminal. Refer to ADP-8, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Description". Additional Service When Removing Battery Negative Terminal