Fluid Line/Hose: Service and Repair
A/T FLUID COOLER TUBETM-190 Exploded View:
AWD: Removal and Installation
REMOVAL
1. Remove the engine lower cover and front under cover with power tool.
2. Remove the front suspension member.
3. Remove exhaust front tube and center muffler with power tool.
4. Remove exhaust mounting bracket.
5. Remove the three-way catalyst (right bank).
6. Remove front propeller shaft.
7. Pull out the A/T fluid cooler hose from the A/T fluid cooler tube.
8. Remove the A/T fluid cooler tube from the A/T assembly and engine assembly.
CAUTION: Be careful not to bend A/T fluid cooler tube.
INSTALLATION
Install in the reverse order of removal.
AWD: Inspection
INSPECTION AFTER INSTALLATION
Check for A/T fluid leakage and A/T fluid level after completing installation. Refer to TM-141, "Inspection". Procedures