Shift Linkage: Service and Repair
CONTROL RODTM-161 Exploded View:
Removal and Installation
REMOVAL
1. Disconnect control device and control rod.
2. Remove manual lever from A/T assembly.
3. Remove control rod from manual lever.
INSTALLATION
Note the following, and install in the reverse order of removal.
^ When installing control rod to control device assembly, refer to "ADJUSTMENT". Refer to TM-153, "2WD: Inspection and Adjustment" (2WD models), TM-153, "AWD: Inspection and Adjustment" (AWD models). Testing and Inspection
Inspection and Adjustment
INSPECTION AFTER INSTALLATION
Check A/T positions. Refer to TM-153, "2WD: Inspection and Adjustment" (2WD models), TM-153, "AWD: Inspection and Adjustment" (AWD models). Testing and Inspection