Right Side

RIGHT SIDE

DLN-102 Exploded View (Part 1):

DLN-102 Exploded View (Part 2):

RIGHT SIDE: Removal and Installation

REMOVAL
1. Remove the front drive shaft.





2. Remove the side oil seal using a puller (A) [SST: KV381054S0 (J-34286)].

CAUTION: Never damage gear carrier.

INSTALLATION
1. Apply multi-purpose grease to sealing lips of side oil seal.





2. Using the drift (A) [SST: ST33400001 (J-26082)], press-fit side oil seal so that its surface comes face-to-face with the end surface of the side retainer.

CAUTION:
^ Never reuse oil seal.
^ When installing, never incline oil seal.

3. Install the front drive shaft.
4. When oil leaks while removing, check oil level after the installation.