Front Door Window Glass Weatherstrip: Service and Repair

DOOR SASH MOLDING

Exploded View

EXT-39 Exploded View:

Removal and Installation

REMOVAL

FRONT DOOR SASH MOLDING
1. Remove door mirror assembly.
2. Remove front door weather strip.
3. Release roof portion of glass run.





4. Remove front door sash molding (1) connection between door panel and molding from glass run side, using a remover tool (A).

CAUTION: Do not use a material for remover tool (A) which could damage door panel.

5. Remove front door sash molding.

REAR DOOR SASH MOLDING
1. Remove rear door weather-strip.
2. Release roof portion of glass run.





3. Remove rear door sash molding (1) connection between door panel and molding from glass run side, using a remover tool (A).

CAUTION:
- Apply protection tape (B) around the door sash.
- Do not use a material for remover tool (A) which could damage door panel.

4. Remove rear door sash molding.

INSTALLATION
Install in the reverse order of removal.