Removal and Replacement

FRONT REGULATOR

Exploded View

GW-20 Exploded View:

Removal and Installation

REMOVAL
1. Remove the front door finisher.
2. Remove the front door glass.





3. Disconnect the power window motor harness connector (1) and remove the bolts from the module assembly (2).





4. Remove the module assembly (1) from the door panel (2) and then remove the harnesses fixing pawls with plier as shown in the figure.
5. Remove the door module assembly from the door panel.
6. Remove the front door glass run.

INSTALLATION
Install in the reverse order of removal.