Engine Does Not Start With Intelligent Key

ENGINE DOES NOT START WITH INTELLIGENT KEY


Description

- Before performing the diagnosis in the following table, check "Work Flow". Refer to Work Flow.
- Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.

Conditions of Vehicle (Operating Conditions)
- "ENGINE START BY I-KEY" in "WORK SUPPORT" is ON when setting on CONSULT-III.
- Intelligent Key is not inserted in key slot.
- One or more of Intelligent Keys with registered Intelligent Key ID is in the vehicle.




ENGINE DOES NOT START WITH INTELLIGENT KEY


Diagnosis Procedure

1.PERFORM WORK SUPPORT
Perform "INSIDE ANT DIAGNOSIS" on Work Support of "INTELLIGENT KEY". Refer to Intelligent Key.
- GO TO 2.
2.PERFORM SELF DIAGNOSTIC RESULT
Perform "BCM" Self Diagnostic Result.
Is DTC detected?
YES - Refer to B2621 (instrument center), B2622 (console) or B2623 (luggage room).
NO - GO TO 3.
3.CHECK PUSH-BUTTON IGNITION SWITCH
Check push-button ignition switch. Refer to Component Function Check.
Is the inspection normal?
YES - GO TO 4.
NO - Repair or replace malfunctioning parts.
4.CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection normal?
YES - Check intermittent incident. Refer to Intermittent Incident.
NO - GO TO 1.