U0104

U0104 LDP) ICC CAM CAN CIR2





DTC Logic

DTC DETECTION LOGIC

DTC DETECTION LOGIC:

DTC CONFIRMATION PROCEDURE
1.DTC ERASE
Erase the DTC memory of ABS actuator and electric unit (control unit) with CONSULT-III.
- GO TO 2.
2.DTC CONFIRMATION
1. Turn ignition switch ON and wait for 2 seconds or more.
2. Perform the self-diagnosis of ABS actuator and electric unit (control unit) with CONSULT-III.
Is the DTC "U0104" detected?
YES - Refer to U0104.
NO - Refer to Intermittent Incident.




Diagnosis Procedure
1.PERFORM SELF-DIAGNOSIS OF ICC SENSOR INTEGRATED UNIT
Perform ICC sensor integrated unit self-diagnosis with CONSULT-III.
Is any DTC detected?
YES - GO TO 2.
NO - GO TO 4.
2.ICC SENSOR INTEGRATED UNIT TROUBLE DIAGNOSIS
Perform trouble diagnosis of ICC sensor integrated unit. Refer to Testing and Inspection.
- GO TO 3.
3.ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC "U0104" erased?
YES - INSPECTION END
NO - Replace ABS actuator and electric unit (control unit).
4.PROVISIONAL REPLACEMENT OF ICC SENSOR INTEGRATED UNIT
Remove ICC sensor integrated unit. Install a normal ICC sensor integrated unit.
- GO TO 5.
5.ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC "U0104" erased?
YES - Replace ICC sensor integrated unit.
NO - Replace ABS actuator and electric unit (control unit).