C1F02

C1F02 ACCELERATOR PEDAL ACTUATOR





Description
- The accelerator pedal actuator is integrated into the accelerator pedal assembly.
- The accelerator pedal actuator consists of the control unit and motor.




DTC Logic

DTC DETECTION LOGIC









Diagnosis Procedure
1.PERFORM THE SELF-DIAGNOSIS
1. Start the engine.
2. Turn the DCA system ON.
3. Perform "All DTC Reading" with CONSULT-III.
4. Check if the DTC "C1F02" is detected as the current malfunction on the self-diagnosis results of "ICC" or "ACCELE PEDAL ACT".
Is "C1F02" detected as the current malfunction?
YES - Replace the accelerator pedal assembly.
NO - INSPECTION END




Special Repair Requirement

DESCRIPTION
The accelerator pedal released position learning is necessary when the following operation is performed.
- Disconnection and connection of accelerator pedal assembly connector
- Replace accelerator pedal assembly

SPECIAL REPAIR REQUIREMENT
1.ACCELERATOR PEDAL RELEASED POSITION LEARNING
Perform the accelerator pedal released position learning. Description.
- GO TO 2.
2.CHECK DCA SYSTEM
1. Erase the "self-diagnosis results", and then perform "All DTC Reading" again after performing the action test. ( DCA for action test.)
2. Check that the DCA system is normal.
- WORK END