Push-Button Ignition Switch Operation

TAKE AWAY WARNING DOES NOT OPERATE


PUSH-BUTTON IGNITION SWITCH OPERATION PUSH-BUTTON IGNITION SWITCH OPERATION : Description


NOTE:
- Before performing the diagnosis in the following procedure, check "Work Flow". Work Flow.
- Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm the list above twice in order to ensure proper operation. Warning Function.
- Door lock function is normal.




TAKE AWAY WARNING DOES NOT OPERATE


PUSH-BUTTON IGNITION SWITCH OPERATION : Diagnosis Procedure

1.CHECK POWER POSITION
Check if ignition switch position is changing or not.
Does ignition switch position change?
YES - GO TO 2.
NO - Check DTC for BCM. Testing and Inspection.
2.CHECK PUSH-BUTTON IGNITION SWITCH
Check push-button ignition switch. Component Function Check.
Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace the malfunctioning parts.
3.CHECK BUZZER (COMBINATION METER)
Check buzzer (combination meter). Component Function Check.
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace the malfunctioning parts.
4.CHECK COMBINATION METER DISPLAY
Check combination meter display. Component Function Check.
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace the malfunctioning parts.
5.CHECK INSIDE KEY ANTENNA
Check inside key antenna. B2621 (instrument center). B2622 (console). B2623 (luggage room).
Is the inspection result normal?
YES - GO TO 6.
NO - Repair or replace the malfunctioning parts.
6.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.