Engine Does Not Start When Intelligent Key Is Inserted Into Key Slot

ENGINE DOES NOT START WHEN INTELLIGENT KEY IS INSERTED INTO KEY SLOT





Description
- Before performing the diagnosis in the following table, check "Work Flow". Work Flow Intelligent Key System.
- Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.




Diagnosis Procedure
1.PERFORM INITIALIZATION
Perform initialization with CONSULT-III. Reregister all Intelligent Keys.
For initialization and registration of Intelligent Key. Refer to "CONSULT-III Operation Manual NATS-IVIS/NVIS".
Can the system be initialized and can the engine be started with reregistered Intelligent Key?
YES - INSPECTION END
NO - GO TO 2.
2.CHECK KEY SLOT
Check key slot. Key Slot.
Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace the malfunctioning parts.
3.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.