Selective Unlock Function Does Not Operate With Door Request Switch

SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE WITH DOOR REQUEST SWITCH

Description

NOTE:
- Before performing the diagnosis in the following procedure, check "Work Flow". Work Flow.
- Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.

CONDITIONS OF VEHICLE (OPERATING CONDITIONS)

- Intelligent Key is removed from key slot.
- Ignition switch is in the OFF position.
- No Intelligent Keys are inside the vehicle.


Diagnosis Procedure


1. CHECK DOOR LOCK FUNCTION

Check door lock function by door request switch.
Does door lock/unlock with door request switch?
YES- GO TO 2.
NO- - Go to Description (driver side).
- Go to Description (passenger side).
- Go to Description (back door).

2. CHECK "DOOR LOCK-UNLOCK SET" SETTING IN "WORK SUPPORT"

Check "DOOR LOCK-UNLOCK SET" setting in "WORK SUPPORT".
CONSULT Function.
Is the inspection result normal?
YES- GO TO 3.
NO- Set "DOOR LOCK-UNLOCK SET" in "WORK SUPPORT".

3. CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?
YES- Check intermittent incident. Intermittent Incident.
NO- GO TO 1.