With Surround Sound

INSPECTION AND ADJUSTMENT

ADDITIONAL SERVICE WHEN REPLACING SONAR CONTROL UNIT : Work Procedure


1. SAVING VEHICLE SPECIFICATION

-CONSULT
Enter "Re/Programming, Configuration" and perform "Before Replace ECU" to save or print current vehicle specification.
NOTE:
Revision: March 20122013 Infiniti JX
If "Before Replace ECU" cannot be used, use the "After Replace ECU" or "Manual Configuration" after replacing sonar control unit.
- GO TO 2.

2. REPLACE SONAR CONTROL UNIT

Replace sonar control unit. Refer to "Removal and Installation" With Surround Sound.
- GO TO 3.

3. WRITING VEHICLE SPECIFICATION

CONSULT
1.Enter "Re/Programming, Configuration".
2.If "Before Replace ECU" operation was performed, automatically an "Operation Log Selection" screen will be displayed. Select the applicable file from the "Saved Data List" and press "Confirm" to write vehicle specification. Refer to "CONFIGURATION (SONAR CONTROL UNIT) : Work Procedure" With Surround Sound.
3.If "Before Replace ECU" operation was not performed, select "After Replace ECU" or "Manual Configuration" to write vehicle specification. Refer to "CONFIGURATION (SONAR CONTROL UNIT) : Work Procedure" With Surround Sound.
- GO TO 4.

4. OPERATION CHECK

Check that the operation of the sonar control unit is normal.
- Work End.