Powertrain Management: Technical Service Bulletins

• Recalls
  • Recall - Fuel Injectors and Hoses
    • Overview
    • Introduction
    • Dealer Responsibility
    • Service Procedure
      • Overview
      • Disassembly - Passenger Side (Right Side)
      • Disassembly - Front
      • Disassembly - Driver's Side (Left Side)
      • Assembly-Injectors/Intake Plenum
      • Assembly - Driver's Side
      • Assembly - Front
      • Assembly - Passenger Side
      • Injector Connector/Part Kit Installation
      • Passenger Side (# 1, # 3, & # 5)
    • Voluntary Service Campaign - Fuel Injectors & Hoses - Checklist
    • Special Tools - Required to Perform Service Procedure
    • Parts Kit Information
    • Related Parts Information
    • Claims and Quality Inspection Information
    • Owner Letter
  • Recall 95I006000: Fuel Injectors and Hoses Could Leak
• Customer Interest
  • Ignition Key - Difficult to Remove
  • Engine - Cranks, No Start/Hard Start
• By Symptom
  • Customer Interest
    • Ignition Key - Difficult to Remove
    • Engine - Cranks, No Start/Hard Start
  • Driveability
    • Consult-II - NATS Software Update
  • High emissions
    • Enhanced Emissions Program - I/M240
  • Recalls
    • Recall - Fuel Injectors and Hoses
      • Overview
      • Introduction
      • Dealer Responsibility
      • Service Procedure
        • Overview
        • Disassembly - Passenger Side (Right Side)
        • Disassembly - Front
        • Disassembly - Driver's Side (Left Side)
        • Assembly-Injectors/Intake Plenum
        • Assembly - Driver's Side
        • Assembly - Front
        • Assembly - Passenger Side
        • Injector Connector/Part Kit Installation
        • Passenger Side (# 1, # 3, & # 5)
      • Voluntary Service Campaign - Fuel Injectors & Hoses - Checklist
      • Special Tools - Required to Perform Service Procedure
      • Parts Kit Information
      • Related Parts Information
      • Claims and Quality Inspection Information
      • Owner Letter
    • Recall 95I006000: Fuel Injectors and Hoses Could Leak
  • Starting problems
    • Engine - Cranks, No Start/Hard Start
• All Technical Service Bulletins
  • Vehicle - Certification Label/VIN Plate Replacement
  • Electrical - Electronic Component Damage Prevention
  • ECCS System - Testing Precautions
  • Green or Blue (Type 1M) Relay Caution
  • A/C/Fuel Pump Relay - Diagnosis Precautions
  • Ignition Key - Difficult to Remove
  • Recall - Fuel Injectors and Hoses
    • Overview
    • Introduction
    • Dealer Responsibility
    • Service Procedure
      • Overview
      • Disassembly - Passenger Side (Right Side)
      • Disassembly - Front
      • Disassembly - Driver's Side (Left Side)
      • Assembly-Injectors/Intake Plenum
      • Assembly - Driver's Side
      • Assembly - Front
      • Assembly - Passenger Side
      • Injector Connector/Part Kit Installation
      • Passenger Side (# 1, # 3, & # 5)
    • Voluntary Service Campaign - Fuel Injectors & Hoses - Checklist
    • Special Tools - Required to Perform Service Procedure
    • Parts Kit Information
    • Related Parts Information
    • Claims and Quality Inspection Information
    • Owner Letter
  • Recall 95I006000: Fuel Injectors and Hoses Could Leak
  • ECM - Identification
  • Engine Control Module - Identification
  • Oxygen Sensor - Service Information
  • Distributor - Reman Program
  • Engine - Cranks, No Start/Hard Start
  • Enhanced Emissions Program - I/M240
  • CONSULT Lithium Battery - Replacement
  • Loading/Initialization of CONSULT Program Cards
  • Loading and Initializing Consult UE940 Program Card
    • Overview
    • How to Load and Initialize the Consult Software Program
    • Consult Software Loading Procedure
    • How to Use Additional Software From the Program Card
  • ECCS - Testing Precautions
  • Loading/Initialization Of Consult Program Cards
  • Consult-II - Software Cards Updated
  • Consult-II - NATS Software Update
  • CONSULT General Information
  • DTC 45 - Diagnosis Procedures
    • Overview
    • Consult Alpha Test
    • Mass Air Flow Sensor Test
    • Fuel Pressure Regulator Test
    • Injector Leak Down Test
    • Coolant Temperature Sensor Test
    • Oxygen (02) Sensor Test
    • Quality Control Check
  • Revised Fuel Recommendation
  • Engine Controls - Seized O2 Sensor Removal Procedure