Cylinder Head Assembly: Specifications

Tightening procedure:
a) Tighten bolts to 29 Nm (3.0 kg/m, 22 ft/lb).
b) Tighten bolts to 93 Nm (9.5 kg/m, 69 ft/lb).
c) Loosen bolts completely.
d) Tighten bolts to 25 to 34 Nm (2.5 to 3.5 kg/m, 18 to 25 ft/lb).
e) Turn bolts 90 to 95 degrees clockwise or if angle wrench is not available, tighten bolts to 93 to 98 Nm (9.5 to 10.0 kg/m, 69 to 72 ft/lb).