Adjustment After Headlamp Assembly Replacement

Adjustment After Headlamp Assembly Replacement:

If the vehicle has had front body repair and the headlamp assembly has been replaced, the aiming should be checked using the aiming chart as shown in the illustration.

a. Adjust headlamps so that main axis of light is parallel to

Center line of body and is aligned with point up shown in the illustration.

b. Dotted lines in illustration show center of headlamp.

"Ha": Horizontal center line of headlamps

"W " Distance between each headlamp center

"L":7,620 mm (300.00 in)

"C":75.5 mm (2.972 in)

Even if the horizontal indicator does not align with the indicator line or the bubble is not centered in the vertical indicator after aiming by the chart, it is acceptable if they are within the O.K. ranges.