Generic Scan Tool Diagnosis-A/T Control Unit Power Source

A/T Control Unit Pwr. Source-GST Display:

DTC DETECTING CONDITION (CUPS)
1. Start engine.
2. Drive vehicle under the following conditions: Shift lever in D, vehicle speed higher than 10 km/h (6 MPH), throttle opening greater than 1/8 of the full open position, engine speed higher than 450 rpm and driving for more than 10 minutes.
3. Select "MODE 3" with OST.

NOTE: This is the same Diagnostic Trouble Code as "Fluid Temperature Sensor".

A/T Control Unit Pwr. Source-Trouble Judgement Conditions:

TROUBLE JUDGEMENT CONDITIONS