Appendix A
Completing the SRT Vehicle Identification Work Sheet1. Customer Information.
Record the appropriate information from the Work Order.
2. Vehicle Information.
Record the following information from the vehicle:
^ Model (I30, Q45, QX4, etc.).
^ VIN (always take the VIN directly from the vehicle ID plate). Place one letter or number in each box.
^ Model Year. The 10th digit of the VIN determines the model year. T = 1996, V = 1997.
^ Transmission type. (A/T or M/T).
^ Emissions Certification:
---> 1996 I30 models have different drive patterns for vehicles with Federal or California emissions certification. Several States other than California require California emissions certification.
--> Check the under hood emissions label on I30's to determine the emissions certification for the vehicle being inspected (refer to Figure 5).
^ ECM Part number. (Use CONSULT to display the ECM part number as outlined in step 4)
3. SRT Support Information.
Refer to the SRT System Chart and determine and record the following:
^ Drive Pattern Number.
^ SRT Check Items.
^ SRT Vehicle Identification Worksheet shown.
Infiniti SRT System Chart
NOTE:
- SRT Items highlighted in gray indicate the drive pattern section for that item must be repeated if the section is interrupted by releasing the throttle when not directed to do so.
- No gray highlight indicates the drive pattern for that SRT item will resume at point of interruption if the drive pattern for that SRT item is interrupted by releasing the throttle when not directed to do so.