With Manufacturer's Scan Tool (CONSULT II)

HOW TO ERASE DIAGNOSTIC TROUBLE CODES (WITH CONSULT)
- If a DTC is displayed for both Engine Control Module (ECM) and A/T control unit, then you'll need to erase the code for both ECM and A/T control unit.
- If diagnostic trouble code is not for A/T related items, skip steps 2 through 4.




1. If the ignition switch stays "ON" after repair work, be sure to turn ignition switch "OFF" once. Wait at least 5 seconds and then turn it "ON" (engine stopped) again.
2. Turn CONSULT "ON" and touch "A/T".
3. Touch "SELF-DIAG RESULTS".
4. Touch "ERASE". (The DTC in the A/T control unit will be erased.) Touch "BACK" twice.
5. Touch "ENGINE".
6. Touch "SELF-DIAG RESULTS".
7. Touch "ERASE". (The DTC in the ECM will be erased.)