With CONSULT

DIAGNOSTIC TROUBLE CODE CONFIRMATION PROCEDURE
Procedure for malfunction A
1) Turn ignition switch "ON" and select "DATA-MONITOR" mode with CONSULT.




2) Confirm that the engine coolant temperature is lower than 50°C (122°F). (If necessary, wait until the engine coolant temperature is the same as atmosphere temperature.)
3) Start engine and run it for at least 8 seconds at idle speed. [Under the engine coolant temperature is lower than 50°C (122°F).

Procedure for malfunction B
1) Start engine and warm it up sufficiently.
2) Turn ignition switch "OFF", wait at least 5 seconds and then start engine again.
3) Select "DATA MONITOR" mode with CONSULT.
4) Run the engine for at least 5 seconds at idle speed.