With Generic Scan Tool

HOW TO DISPLAY AND READ DIAGNOSTIC TROUBLE CODES (WITH GENERIC SCAN TOOL)
1. Turn OFF ignition switch.
2. Connect Generic Scan Tool (GST) to data link connector for GST. (Data link connector for GST is located under LH dash panel near the fuse box cover.)
3. Turn ON ignition switch.




4. Enter the program according to instruction on the screen or in the operation manual.
(*: Regarding GST screens, sample screens are shown.)




5. Perform each diagnostic mode according to each service procedure.

^ For further information, see the GST Operation Manual of the tool maker.




GST MODE FUNCTIONS