Rear Power Window Switch Illumination-IVMS

Power is supplied at all times
^ to tail lamp relay terminals (1) and (6)
^ through 15 A fuse [No. [63] located in the fuse, fusible link and relay box].
Ground is supplied
^ to the lighting switch terminal (5)
^ through body grounds (E22) and (E36).
When the lighting switch is turned to 1ST or 2ND position, ground is supplied
^ to tail lamp relay terminal (2)
^ from the lighting switch terminal (11).
Tail lamp relay is then energized, and power is supplied
^ from tail lamp relay terminal (7)
^ through 7.5 A fuse [No.[22], located in the fuse block (J/B)].
^ to Body Control Module (BCM) terminal (3)
BCM is connected to LCU03 and LCU04 as DATA LINE A-1 or A-2.
Rear power window switch illuminations are combined with LCUs.
When lighting switch is turned to 1ST or 2ND position, BCM sends a signal to turn on rear power window switch illuminations.