Initial Inspection (Basic Inspection)

1 INSPECTION START:

2 CONNECT CONSULT TO THE VEHICLE:

3 CHECK IGNITION TIMING:

4 CHECK BASE IDLE SPEED:

5 CHECK CLOSED THROTTLE POSITION SWITCH IDLE POSITION:

6 ADJUSTMENT THROTTLE POSITION SENSOR IDLE POSITION-1:

7 ADJUSTMENT THROTTLE POSITION SENSOR IDLE POSITION -2:

8 ADJUSTMENT THROTTLE POSITION SENSOR IDLE POSITION-3:

9 RESET THROTTLE POSITION SENSOR IDLE POSITION MEMORY:

10 CHECK TARGET IDLE SPEED:

11 CHECK IGNITION TIMING:

12 CHECK BASE IDLE SPEED:

13 CHECK CLOSED THROTTLE POSITION SWITCH IDLE POSITION:

14 ADJUSTMENT THROTTLE POSITION SENSOR IDLE POSITION-1:

15 ADJUSTMENT THROTTLE POSITION SENSOR IDLE POSITION-2:

16 ADJUSTMENT THROTTLE POSITION SENSOR IDLE POSITION-3:

17 REINSTALLATION:

18 RESET THROTTLE POSITION SENSOR IDLE POSITION MEMORY:

19 CHECK TARGET IDLE SPEED:

20 ERASE UNNECESSARY DTC:

BASIC INSPECTION

Precaution:
Perform Basic Inspection without electrical or mechanical loads applied;
- Headlamp switch is OFF,
- Air conditioner switch is OFF,
- Rear window defogger switch is OFF,
- Steering wheel is in the straight-ahead position, etc.