Data Monitor Mode Procedure & Chart

DATA MONITOR PROCEDURE




1. Connect CONSULT to data link connector for CONSULT then start the engine.




2. Touch "START", "ACT D/SUS" and "DATA MONITOR".




3. Select the signal to be monitored.
1. When "ALL SIGNALS" is selected, touch "START".
2. When "SELECTION FROM MENU" is to be selected, touch "SETTING". "MONITOR ITEM MENU" will then be indicated on the display. Touch the item to be monitored, then "ENTER" and "START".
3. Print out the data if necessary.




DATA MONITOR MODE




Specifications for control unit input and output signals Standard values emitted by CONSULT
Output signals refer to the data which are operated by the control unit. If an output circuit (harness) is broken, normal values are displayed.