Vehicle Security Theft Warning System

PRELIMINARY CHECK
The system operation is canceled by turning ignition switch to "ACC" at any step between START and ARMED in the following flow chart.
After performing preliminary check, go to symptom chart.




Before starting trouble diagnoses above, perform preliminary check.
Symptom numbers in the symptom chart correspond with those of preliminary check.

POWER SUPPLY AND GROUND CIRCUIT CHECK




Power Supply Circuit Check




Ground Circuit Check

DOOR, HOOD AND TRUNK ROOM LAMP SWITCH CHECK

Steps 1 - 2:

Step 3:

Door Switch Check

Steps 1 - 3:

Step 4:

Hood Switch Check

Steps 1 - 2:

Step 3:

Trunk Room Lamp Switch Check

Steps 1 - 3:

SECURITY INDICATOR LAMP CHECK

Steps 1 - 2:

DOOR UNLOCK SENSOR CHECK

Step 1:

Step 2:

DOOR KEY CYLINDER SWITCH CHECK

Step 1:

Step 2:

TRUNK LID KEY CYLINDER SWITCH CHECK

Steps 1 - 3:

Step 4:

VEHICLE SECURITY HORN ALARM CHECK

Steps 1 - 4:

Step 5:

VEHICLE SECURITY HEADLAMP ALARM CHECK