Data Monitor Procedure

DATA MONITOR PROCEDURE





1. Connect CONSULT-II to data link connector, then start the engine.





2. Touch "START", "ACT D/SUS" and "DATA MONITOR".





3. Select the signal to be monitored.
1) When "ALL SIGNALS" is selected, touch "START".
2) When "SELECTION FROM MENU" is to be selected, touch "SETTING". "MONITOR ITEM MENU" will then be indicated on the display. Touch the item to be monitored, then "ENTER" and "START".
3) Print out the data if necessary.





DATA MONITOR MODE





Specifications for control unit input and output signals
Standard values emitted by CONSULT-II
Output signals refer to the data which are operated by the control unit. If an output circuit (harness) is broken, normal values are displayed.