Flow of Diagnosis

1. Check the symptom and customer's requests.
2. Understand the system description. Refer to "System Description". Description and Operation
3. Carry out the preliminary check. Refer to "Preliminary Check".
4. Carry out the communication inspection. If CONSULT-II is used, refer "IVMS communication diagnosis.". If CONSULT-II is not used, refer to "COMMUNICATION DIAGNOSIS". Is the communication diagnosis result OK? If OK, GO TO 7. If NG, GO TO 5.
5. Repair or replace depending on the diagnosis result.
6. Carry out the communication diagnosis again. If CONSULT-II is used, refer to "IVMS communication diagnosis.". If CONSULT-II is not used, refer "COMMUNICATION DIAGNOSIS". Is communication diagnosis result OK? If OK, GO TO 7. If NG, GO TO 5.
7. Perform self-diagnosis. If CONSULT-II is used, refer to "Operation procedure". If CONSULT-II is not used, refer to "ON BOARD DIAGNOSIS FOR AUTOMATIC DRIVE POSITIONER". Is self-diagnosis result OK? If OK, GO TO 11. If NG, GO TO 8.
8. Repair or replace depending on the diagnosis result.
9. Carry out the self-diagnosis again. If CONSULT-II is used, refer to "Operation procedure". If CONSULT-II is not used, refer to "ON BOARD DIAGNOSIS FOR AUTOMATIC DRIVE POSITIONER". Is self-diagnosis result OK? If OK, GO TO 11. If NG, GO TO 8.
10. Referring to Trouble diagnosis chart, repair or replace the cause of the malfunction. Refer to "Symptom Chart". Symptom Chart
11. Does the Reverse Interlock Door Mirror System operate normally? If it operates normally, GO TO 12. If not, GO TO 10.
12. Inspection end