Data Monitor

Operation Procedure




1. Select the desired part to be diagnosed on the "SELECT TEST ITEM" screen.

2. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.




3. Touch "MAIN SIGNALS" or "SELECTION FROM MENU" on "DATA MONITOR" screen.
4. Touch "START".
5. If "SELECTION FROM MENU" is selected, touch the desired monitor item. If "ALL SIGNALS" is selected, the all item required to control is monitored.
6. During monitoring, touching "COPY" can start recording the monitor item status.

Remote Keyless Entry Item:

Remote Keyless Entry Item.

Trunk Lid Opener Item:

Trunk Lid Opener Item