CONSULT-II Inspection Procedure

Operation procedure
1. Touch "AUTO DRIVE POSITIONER" on the "SELECT TEST ITEM" screen.
2. Touch "SELF-DIAG RESULTS" on the "SELECT DIAG MODE" screen.
3. Touch "START" on the "SELF-DIAG RESULTS" screen.
4. The seat and steering wheel automatically move, and the self-diagnosis for the seat and steering wheel starts.
5. Within 15 seconds after the self-diagnosis for the seat and steering wheel are completed, drive the vehicle at a speed of 7 km/h (4 MPH) or higher for the vehicle speed sensor self-diagnosis.
6. After the diagnosis is completed, the faulty system name is displayed.
7. When the faulty items are displayed, touch "COPY" to keep the records.
8. Touch "ERASE".
9. Perform the self-diagnosis again to check that any malfunctioning item is displayed.
10. Perform the inspection on the displayed items.

Display Item List Part 1:

Display item list

Display Item List Part 2:

Auto drive positioner incident memory
It stores the incident records of the input/output system related to the auto driving position system, and displays them on the CONSULT-II screen.