Reading and Clearing Diagnostic Trouble Codes

CONSULT-II Inspection Procedure

"MULTI REMOTE ENT"
1. Turn ignition switch "OFF".







2. Connect "CONSULT-II" and "CONSULT-II CONVERTER" to the data link connector.
3. Turn ignition switch "ON".







4. Touch "START(NISSAN BASED VHCL)".







5. Touch "BCM".
If BCM" is not indicated go to CONSULT-II Checking System, "CONSULT-II Data Link Connector (DLC) Circuit".







6. Touch "MULTI REMOTE ENT".







7. Select diagnosis mode.
"DATA MONITOR", "ACTIVE TEST" and "WORK SUPPORT" are available.