Vehicle Immobilizer System

CONSULT-II

CONSULT-II INSPECTION PROCEDURE
1. Turn ignition switch OFF.







2. Insert IVIS (NATS) program card into CONSULT-II.
Program card : NATS (AEN02B)
3. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector.







4. Turn ignition switch ON.
5. Touch "START".







6. Select "NATS V.5.0".
If NATS V5.0" is not indicated, go to CONSULT-II Checking System, "CONSULT-II" Data Link Connector (DLC) Circuit".







7. Perform each diagnostic test mode according to each service procedure.
For further information, see the CONSULT-II Operation Manual NATS-IVIS/NVIS.