Front Disc Brake (CLZ25VD Type)

Components





CAUTION:
^ Clean dust on caliper and brake pad with a vacuum dust collector. Do not blow with compressed air.
^ While brake pad and cylinder body are separated, piston may suddenly jump out, so do not depress brake pedal.
^ It is not necessary to remove bolts on torque member and brake hose except for disassembly or replacement of caliper assembly. In this case, hang cylinder body with a wire so that brake hose is not under tension.
^ Do not damage piston boot.
^ If any shim is subject to serious corrosion, replace it with a new one.
^ Always replace shims and shim covers as a set when replacing brake pads.
^ Keep rotor clean of brake fluid.