Auxiliary Mechanism: Temperature Setting Trimmer

AUXILIARY MECHANISM: TEMPERATURE SETTING TRIMMER
The trimmer compensates for differences in range of 13 °C (16 °F) between temperature setting (displayed digitally) and temperature felt by driver.

Operating procedures for this trimmer are as follows:
- Begin Self-diagnosis STEP-5 mode. Refer to "Self-diagnosis Function"
Self-Diagnosis / Function Confirmation

- Press (fan) UP switch to set system in auxiliary mode.
- Display shows 61 in auxiliary mechanism. It takes approximately 3 seconds.

- Press the TEMP switch as desired. Temperature will change at a rate of 0.5 °C (1.0 °F) each time a dial is turned.

When battery cable is disconnected trimmer operation is canceled. Temperature set becomes that of initial condition i.e. 0 °C (0 °F).