CONSULT-II Basic Operation Procedure

SYSTEM INSPECTION
- When the Remote Keyless Entry System is malfunctioning, determine which part has caused the incident, before carrying out the trouble diagnosis.
- Using the diagnosis flowchart, determine whether the electronic key or the vehicle component (remote keyless entry receiver or BCM) has a malfunction and confirm the part to be checked.





DIAGNOSTIC ITEMS DESCRIPTION

CONSULT-II executes the given functions by combining data reception and command transmission via the communication line from BCM. IVMS communication inspection, work support (only function setting of seats and steering wheel), self-diagnosis, data monitor, and active test display.

BASIC OPERATION PROCEDURE




1. With the ignition switch OFF, connect "CONSULT-II" and "CONSULT-II CONVERTER" to the data link connector, and turn the ignition switch ON.




2. Touch "START".




3. Touch "IVMS".
If "IVMS" is not indicated, go to "CONSULT-II Data Link Connector (DLC) Circuit" . CONSULT-II Checking System




4. Check the model specification, touch either "WITH SUNROOF" or "WITHOUT SUNROOF".
5. Touch "OK". If the selection is wrong, touch "CANCEL".
6. Select the desired part to be diagnosed on the "SELECT TEST ITEM" screen.