Vehicle Security (Theft Warning) System

CONSULT-II INSPECTION PROCEDURE
1. Turn ignition switch "OFF".




2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector.




3. Turn ignition switch "ON".
4. Touch "START (NISSAN BASED VHCL)".




5. Touch "IVMS" on the "SELECT SYSTEM" screen.
If "IVMS" is not indicated, go to "CONSULT-II Data Link Connector (DLC) Circuit" . CONSULT-II Checking System




6. Check the model specification, touch either "WITH SUNROOF" or "WITH OUT SUNROOF".
7. Touch "OK". If the selection is wrong, touch "CANCEL".




8. Touch "THEFT WARNING SYSTEM" on the "SELECT TEST ITEM" screen.
- WORK SUPPORT, DATA MONITOR and ACTIVE TEST are available for the vehicle security system.