Power Door Lock System Self Diagnosis Procedure

How To Perform Self-Diagnosis




Description
In this mode, a malfunction code is indicated by the number of flashes from the map lamps and step lamps as shown:

After indicator lamp turns ON for 2 seconds and then turns OFF, it flashes to indicate a malfunction code. For example, the indicator lamp goes on and off for 0.5 seconds three times. This indicates malfunction code of rear RH door lock actuator / unlock sensor.




Malfunction Code Table

Cancel of Self-Diagnosis
- Turn ignition switch OFF.
- Ten minutes has passed since the diagnosis result indication start without any diagnosis cancel operation.